The model of hydraulic hose can usually be seen from the pipe marking or product model. Different manufacturers may have different marking methods, but generally the following information can help you identify the model of hydraulic hoses:
1. Inner diameter (inner diameter): Hydraulic hoses typically have a specific inner diameter used to determine the size of the fluid channel inside the pipeline. The inner diameter is expressed in millimeters (mm), such as 10mm, 25mm, etc.
2. Pressure rating: Hydraulic hoses are usually labeled with their pressure resistance or working pressure range. Pressure is usually expressed in megapascals (MPa) or pounds per square inch (psi), such as 20MPa, 3000psi, etc.
3. Applicable standards: Hydraulic hoses may comply with specific national or industry standards. These standards can be indicated on the product, such as international standard ISO 18752, European standard EN 853, etc.
4. Durable material: The material of hydraulic hose is usually composed of rubber and reinforcement layer. The labeling of pipes may include information about the type of rubber, reinforcement layer material, and outer protective material.
Zaozhuang Jinfulex Rubber Technology Co., Ltd. reminds customers that the marking method of hydraulic hose models may vary from different manufacturers. You can refer to the product packaging, product manual, or contact the seller or manufacturer to obtain accurate model information and technical parameters. If there are special requirements or specific models of hydraulic hoses are needed, it is recommended to communicate with professional hydraulic engineers or suppliers to ensure that the selected hydraulic hoses are suitable and meet the requirements.
